Corrugated Sidewall Conveyor Belt :

The latest addition to the vast range of Sharda Conveyor Belts is The Corrugated Sidewall & Cross Cleats
Conveyor Belts which have found acceptance with many of our existing customers.

Advantages :

Corrugated sidewall conveyor belt is one of the most effective ways of elevating materials in a confined
space, the economy is achieved by single belt operation, wide range material can be handled, less space
requirement, no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be
designed into a set of complete transportation system according to application.
 
Base Belt Structure:

Four parts: Top cover rubber; Bottom cover rubber; Reinforced core; Cross rigid.
Thickness of top cover rubber: 3-6mm
Thickness of bottom cover rubber: 1.5-4.5mm.
Belt core: Cotton, Nylon, EP or Steel Cord

The Width is the same as normal belt.
 
Cleat types: T, TS, C , TC and TCS
The cleat is made of enforced fabric, solid, anti-shock to avoid distortion.
“TS and TCS” cleat are normally used for abrasion condition.
“T and TS” cleat are normally used up to 40°C, “TC and TCS” are normally used from 40° to 90°C.
Sidewall, cleat and base belt are joined through hot vulcanization.
Cleat and sidewall are joined through bolt to prevent leakage


Base Belt
Width B (mm)
Sidewall
Height H (mm)
Cleat
Height H1 (mm)
BF
(mm)
Br
(mm)
B
(mm)


300
40
35
25
180
35
60
55
50
120
40
80
75
400
60
55
50
180
60
80
75
100
90
500
80
75
50
250
75
100
90
120
110
650
100
90
50
350
100
120
110
160
140
75
300
800
120
110
50
460
120
160
140
75
410
200
180
1000
60
140
75
550
150
200
280
240
220
1200
160
140
75
690
180
200
180
240
220
300
280
105
630
1400
200
180
75
830
210
240
220
300
280
105
770
400
360
1600
200
180
75/105
970
240
240
220
300
280
75
910
400
360
1800
240
220
105
1110
270
300
280
125
1050
400
360
500
460
1010


 
 
 
Home About Us Feedback Contact Us